MonnaLisa

BK-monnalisa

Technical data

 Axes Strokes  Axes Speed
 X 3.200 mm  50 mt/1′
 Y 2.000 mm  50 mt/1′
 Z 1.000 mm  50 mt/1′
A (*)  +/- 110°  140° /sec
C (*)  +/- 200°  140° /sec

NOTES: (*) Variable depending on the head type

Spindle features

Power 95 kW
Torque 29 Nm
Speed 500 – 30.000 rpm
Taper HSK F80
MonnaLisa

Description

Monnalisa is the innovative horizontal 5 axis milling centre specifically developed for machining monolithic, structural, large dimension aluminum parts, particularly suitable for aerospace industry applications

The axis strokes and the attention to their movement
The X carriage consists of a rigid double column in cast iron and it is moved by 4 gearboxes with integrated pinion and 4 brushless motors. The Gantry configuration presents two Twin Drive systems for the recovery of any backlash through an electronic preload.
The Y axis is mounted on roller sliding blocks which slide on guides housed on the axis X fusion; the Z axis is made by a parallelepiped rectified structure which slides on roller sliding blocks, whose guides are housed instead on the Y axis fusion.
The cross system vertical axis/RAM, respectively Y axis and Z axis, is  made by two integrated structures Box in Box.
The carriage position is detected by optical encoded and pressurized lines, made by Heidenhain.

Extremely robust structure, in cast iron
The machine structure is built in cast iron and reinforced in strategic points, giving therefore also great rigidity and dynamics, with the minimal temperature drift.  The machine is equipped with PT100 temperature detection, used for any eventual upgrading.

Large capacity automatic tool changer
Rack with 120 tools positioned on the side and properly protected by working chips as well as dust when not used.

Double working table, pallet change type
The working tables are made by two large dimension working plates (3200 x 2000 mm), symmetrical (pallet change) to allow replacing of the pieces during the machining cycle.
The aluminum working tables have been developed to use vacuum extraction and any system of clamping piece, with a capacity of 2000 kg each plate (total weight admitted on the working tables kg 8000).
The movement of the two tables, pendular type, is obtained with carriages moving on a sliding line.
The area of the piece substitution ensures the easiest position to the operator during the replacing’s phases, working in full safety.

Easy loading operations thanks to table rotation
Loading operations are made easily by the ± 90° table rotation obtained by two mechanical arms hydraulically operated, while for the table gripping are used four hydraulic pistons.

Large volume of chips evacuation
Thanks to a large dimension belt chip conveyor (800 mm width, 300 mm height) positioned under the working area, a volume of about 1 cubic meter/hour is evacuated.

Materials

Applications Sectors

Aluminum
Steel
Aerospace

VentorPower

BK-VentorPower

Materials

Applications Sectors

Aluminum
Titanium
Aerospace
Automotive
VentorPower

Description

VentorPower is a 5-axis machining centre, portal type with mobile bridge and fixed table, equipped with advanced technological solutions capable to reach outstanding performances.

The axes movements are on roller guides and screws rectified to double spiral preloaded, the positioning accuracy of the axes is detected by optical lines, the RAM is “box in box“ type.  Available also a “Cross Mobile” version with Z1 Racing (RAM) up to 1800 mm and Z2 (bar) up to 4000 mm .

Can be mounted both heads with 5 axes with continuous interpolation or “Index” type, additional option the «automatic head change» system.

VentorPower is a machining centre for steel, cast iron, titanium and aluminum, suitable for industrial sectors such as Mechanical Fabrication.

Technical data

 Axes Strokes  Axes Speed
 X 6.000 – 40.000 mm  30 mt/1′
 Y 3.800 – 5.000 mm  30 mt/1′
 Z 1.500 – 2.000 mm  30 mt/1′
A (*)  +/- 120°  180° /sec
C (*)  +/- 365°  180° /sec

NOTES: (*) Variable depending on the head type

Spindle features

Power 30 – 100 kW
Torque 150 – 1000 Nm
Speed 5.000 – 18.000 rpm

VentorFast

BK-VentorFast

VentorFast

Description

VentorFast is a 5-axis machining centre “portal” type with mobile bridge and fix working table, designed to obtain the maximum rigidity and the best resistance even under the most severe working conditions.

The vertical axis rigidity is guaranteed by movement performed along 4 guides within the “RAM” “box-in-box” structure.

The X/Y/Z axis displacement is obtained by dual drive gantry system, while the axes positioning accuracy is detected by optical lines.

The machine can be equipped with 5 axes continuous interpolation as well as with “Index” type heads.

VentorFast performs high speed machining and high accuracy processing of aluminum and steel, with proved successfull applications in the aerospace sector.

Technical data

 Axes Strokes  Axes Speed
 X 2.000 – 20.000 mm  30 mt/1′
 Y 1.600 – 4..00 mm  30 mt/1′
 Z 1.000 – 2.000 mm  30 mt/1′
A (*)  +/- 120°  180° /sec
C (*)  +/- 365°  180° /sec

NOTES: (*) Variable depending on the head type

Spindle features

Power 10 – 65 kW
Torque 0 – 180 Nm
Speed 5.000 – 18.000 rpm

Materials

Applications Sectors

Aluminum
Steel
Aerospace

VentorMaster

BK-VentorMaster
VentorMaster

Description

VentorMaster is a 5-axis machining centre designed to obtain high torque needed to work on hard metals such as steel and titanium.

This machines have a fixed table and mobile transversal bar which runs along the X axis guides which are placed in the upper part.

The axes movements are on roller guides and screw rectified to double preloaded scroll, while the axes positioning accuracy is detected by optical lines. The movement of the vertical axis “RAM” occurs within a “box-in-box” structure.

Available 5 axis heads versions either with continuous interpolation or «Index» type.

VentorMaster develops high torque and has an extremely robust structure, features which makes it particularly suitable for metal machining performed by molding companies and mold makers

Technical data

 Axes Strokes  Axes Speed
 X 2.000 – 20.000 mm  30 mt/1′
 Y 1.600 – 4.000 mm  30 mt/1′
 Z 1.000 – 2.000 mm  30 mt/1′
A (*)  +/- 120°  180° /sec
C (*)  +/- 365°  180° /sec

NOTES: (*) Variable depending on the head type

Spindle Features

Power 30 – 100 kW
Torque 150 – 1.000 Nm
Speed 5.000 – 18.000 rpm

Materials

Applications Sectors

Aluminum
Steel
Titanium
Automotive

LaborWind

BK-laborwind
LaborWind

Description

LaborWind is the family of machining centres designed for those applications requiring the biggest working fields, especially for the vertical “Z” axis.

The mobile crossbeam, “suspended” on lateral steel or reinforced concrete structures, allows to cover very large working areas without overload the basic structure of the machine. Available with various spindle power and tool magazine configurations, with longer longitudinal axis strokes versions the machine can also be supplied with double mobile crossbeam and independent working unit, thus to double the production capacity.

LaborWind is the solution for the machining of parts and models of wind turbines, but also an alternative option for marine applications.

Technical data

 Axes Strokes  Axes Speed
 X 8.000 -10.000 – 15.000 mm
20.000 – 30.000 – 40.000 mm
 80 mt/1′
 Y 4.000 – 5.000 – 6.000 mm
6.500 – 7.500 – 8.000 mm
 80 mt/1′
 Z 2.500 – 3.000 -3.500 mm
4.000 – 4.500 – 8.000 mm
 40 mt/1′
A (*)  +/- 120°  40 mt/1′
C (*)  +/- 365°  30 mt/1′

NOTES: (*) Variable depending on the head type

Spindle features

Power 22 – 30 kW
Torque 28 – 45 Nm
Speed 12.000 – 30.000 rpm

Materials

Applications Sectors

Composites
Resin
Wood
Aluminum
Aerospace
Marine
Wind

LaborMarine

BK-labormarine
LaborMarine

Description

LaborMarine allows to have an appropriate working area for large dimension parts milling, ensuring at the same time the maximum machine accessibility for loading/unloading operations. Although these are typical requirements of the marine sector model manufacturers, today this machine is particularly appreciated also from the foundry model makers.

Thanks to its mobile portal configuration, the machine can also be laterally loaded/unloaded, with clear advantages for the manufacturing space organization.

With LaborMarine the working area is exactly configurable according to the specific need, making the best use of the available space in the factory.

Technical data

 Axes Strokes  Axes Speed
 X 2.600 – 4.000 mm  80 mt/1′
 Y 4.000 – 6.500 – 8.000 – 11.000 – 12.600 mm  80 mt/1′
 Z 1.800 mm  40 mt/1′
A (*)  +/- 120°  40 mt/1′
C (*)  +/- 365°  30 mt/1′

NOTES: (*) Variable depending on the head type

Spindle features

Power 10 – 22 kW
Torque 9,5 – 18 Nm
Speed 18.000 – 24.000 rpm

Materials

Applications Sectors

Composites
Resin
Wood
Aluminum
Automotive
Marine
Industrial

LaborShape

BK-Laborshape
LaborShape

Description

LaborShape is a 5 axis machining centre specifically designed for high speed machining on aluminum and light alloys.

Compact dimensions and extremely rigid monolithic structure, axis displacement with recirculating ball screws and magnetic linear guides to ensure the best accuracy, working head with torque motors are the main technical features which makes this model the best solution for high chip removal.

LaborShape is the best answer to the working requirements for models and/or prototypes in aluminum or light alloys, whereas high accuracy level and finishing quality are requested.

Technical data

 Axes Strokes  Axes Speed
 X 2.000 – 2.500 – 3.000 – 4.000 – 5.000 – 6.000 mm  80 mt/1′
 Y 2.000 – 2.500 – 3.000 mm  80 mt/1′
 Z 1.250 mm  40 mt/1′
A (*)  +/- 120°  40 mt/1′
C (*)  +/- 365°  30 mt/1′

NOTES: (*) Variable depending on the head type

Spindle features

Power 22 – 30 kW
Torque 28 – 45 Nm
Speed 12.000 – 30.000 rpm

Materials

Applications Sectors

Composites
Resin
Aluminum
Light Alloys
Aerospace
Molds
Industrial

Labormac

BK-labormac

LaborMac

Description

LaborMac is a 5-axis machining centre specifically developed to optimize the machining of molds and parts in aluminum and composite.

The extreme rigidity provided by the monolithic structure with Gantry type mobile portal on the Y axis, significantly limits the vibrations helping to achieve very good quality even at high speeds.

LaborMac version “A“, dedicated to aluminum machining typical of the automotive sector, is equipped with a working head of higher robustness, tool’s cooling system by chemical water, steel table with T-slots and two chips conveyors .

The version “C”, equipped with Oil Mist, offers instead high performance in modeling and trimming of composite materials and resins.

Technical data

 Axes Strokes  Axes Speed
 X 2.600 mm  80 mt/1′
 Y 1.500 mm  80 mt/1′
 Z 1.000 mm  60 mt/1′
A  +/- 120°  40 mt/1′
C  +/- 365°  30 mt/1′

Spindle features

15 Kw – 24.000 rpm

Materials

Applications Sectors

Composites
Resin
Aluminum
Light Alloys
Aerospace
Automotive
Molds
Industrial

LaborMidi

BK-Labormidi
LaborMidi

Description

LaborMidi has been specifically designed to machine aluminum, plastics or wood panels, also of large dimensions, with a limited investment of space and money.

Its “open” configuration with mobile bridge allows a wide access from the 4 sides of the machine, but its design also allows to be used in totally automated production systems which require automatic loading/unloading by robotized devices.

The machine is available in the 3 and 5 axes version and can be equipped with a wide range of accessories according to customer needs.

LaborMidi is an effective solution for panel machining with a very good quality/price ratio, extremely easy to install and introduce in the production process.

Materials

Applications Sectors

Plastics
Wood
Aluminum
Mold
Industrial

Technical data

 Axes Strokes  Axes Speed
 X 3.000 – 4.000 – 6.000 – 8.000 – 12.000 mm  80 mt/1′
 Y 1.500 – 2.000 mm  80 mt/1′
 Z 250 – 600 mm  40 mt/1′
A (*)  +/- 120°  40 mt/1′
C (*)  +/- 365°  30 mt/1′

NOTES: (*) Variable depending on the head type

Spindle features

Power 15 – 40 kW
Torque 13,5 – 60 Nm
Speed 6.000 – 18.000 rpm

LaborMix

BK-labormix
LaborMix

Description

LaborMix is a 5 interpolated axis milling centre specifically designed for the machining of plastic and composite materials.

Equipped with working head with spindle at two opposite exits or four independent spindle head, it is the best solution for three-dimensional trimming of thermoformed parts. With working head with spindle and automatic tool-changer, it is instead widely used for the machining of small resin and wood models.

LaborMix allows to achieve very high productivity results and quality in trimming operations, with modeling capability.

Technical data

 Axes Strokes  Axes Speed
 X  2.500 – 3.000 – 4.100 – 5.100 – 6.100 mm  80 mt/1′
 Y  1.500 – 2.100 – 2.600 – 3.100 mm  80 mt/1′
 Z  900 – 1.200 mm  40 mt/1′
A (*)  +/- 120°  40 mt/1′
C (*)  +/- 365°  30 mt/1′

NOTES: (*) Variable depending on the head type

Spindle features

Power 2,2 – 12 kW
Torque 0,7 – 9,5 Nm
Speed 24.000 – 40.000 rpm

Materials

Applications Sectors

Composites
Plastics
Resin
Wood
Automotive
Railway
Industrial